Skip to main content

I have seen a forum about types of edible 'paper' to use, but not about the printer itself.  

 

I have read, researched and read some more, which printer is the 'best' for edible images.  

 

I would love to know, from my fellow cookiers, what printer you use (including type of ink) and a comment as to what you LIKE or DON'T LIKE about it.  

Last edited by Julia M. Usher
Original Post

Replies sorted oldest to newest

I have an Epson 410 inkjet, I believe, and the print quality is fine, but I find that it has a hard time feeding both wafer paper and frosting sheets, so it jams A LOT, or doesn't feed at all sometimes. Soooo frustrating.

 

You can use most any inkjet printer as long as it hasn't been used before with inedible inks and you buy the right set of food coloring cartridges to fit it. Kopykake has a handy printer-cartridge matching chart here: http://www.kopykake.com/docume...PrinterInks-Xref.pdf

 

However, as noted, feeding issues seem to vary from printer to printer.

 

Jaci Baynes Harper (Ali's Sweet Tooth) seems more pleased with her printer (I believe she has a Canon something), so hopefully she'll comment here.

I bought a Canon from Inkedibles (http://www.inkedibles.com/) and the ink cartriges came with the printer, but I have heard that you can purchase a new printer and and purchase the cartriges separetly. I did also purchase paper from them. The printer works well, BUT you MUST remove the print head after each use and soak it in warm water so it does not clog, as well as take out each ink cartrige and put it in a zip lock bag so they don't clog and dry out as well. I have never had a feed problem with the paper that I have purchased from them.

Last edited by Julia M. Usher

I also have a Canon ip3600 and have had no issues with it. I've owned it for almost two years now and it's still going strong.
I did a write up and linked the best prices for paper and ink refills on my blog.
The only issue I've had with getting it to print was, the cartridges have a little hole at the top and if it isn't open enough, ink will not flow well. I poked it with a needle and it works perfectly.
Signaljet has amazing ink prices even though they are in the UK, they are a fourth (or more) of the cost of all other suppliers. The links are all here
http://www.alissweettooth.com/vendors--products.html

I also have the Canon ip3600.  I purchased it new from Amazon a few years ago.  I bought the edible ink cartridges from www.icingimages.com along with the full sheet edible paper and ink refill kit.  It works great.  I don't use it very often, but when I need it works great.

I have used an Canon MG5320 that I got from Office Depot for less than $70 with coupons. I get my ink cartridges and icing sheets from Ink4cakes.com. I've never had an issue with feeding problems nor clogged ink cartridges...and I tell you, the ink last forever in this. I did a huge order {750 favors} that were full of color and so I bought extra ink cartridges and I didn't have to open them for that project. User friendly printer and very cost efficient. I attached a picture of the favors I did using this printer.

IMAG1757

IMAG1757

Attachments

Images (1)
  • Fundraiser favors

I also have the Canon MG5320 (got mine at Walmart) and get the ink cartridges from Icing Images. I haven't had any feeding problems or ink clogs either. I was told to set the printer up so that the rear tray is used to feed the sheets, and that has worked well for me.

I want to mention that the Canon ip3600 is NOT wireless. I didn't realize that before purchasing mine. It's a major inconvenience for my situation since I don't have room on my computer desk for another printer. Every time I want to use the ip3600 I have to physically carry it to my computer and plug it in to print. PIA!!!!

Originally Posted by Cadillac Cookies:

Does the edible ink have an expiration date (especially once opened)?  Are there any issues/concerns if you don't use the printer/ink very often?? Thanks for the info

Yes, my ink cartridges seem to plug or dry out when not in use. Well, actually the coloring is still visibly fluid in them, but for some reason my printer doesn't recognize them as full. I think others pull out the cartridges and re-seal them when not in use and haven't had this trouble, but I've been too lazy to test this approach.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×