Skip to main content

Made by Manu: 3-D Winter Wonderland Tree Cookie

 

I am celebrating winter with a 3-D winter wonderland tree cookie, and I hope you'll come celebrate with me! This 3-D project doesn’t require any icing "glue" to stand, so it's more like a 3-D cookie platter. The concept behind its construction is similar to that of mug-hugger cookies, which are cookies that "hug" the rim of a mug, thanks to notches cut into the side of them. For this dimensional tree, I designed and hand-cut six notched half-tree cookies that "hug" the top of a contoured cookie "tree trunk". This composition looks suitably magical as it is, but it also easily transforms into a lantern with the addition of a tealight.

What you’ll need for this project:
  • Non-spreading cookie dough*
  • Half-Tree Template (See "Attachments" under "Files" at the end of this post.)
  • Paring knife
  • 1 (1/4 x 2-in/0.6 x 5.1-cm, W x H) mug-hugger cutter (to cut notches in half-tree cookies)
  • Perforated baking mats for bread
  • 1 (2 1/2-in/6.5-cm) stainless steel cake ring or round cookie cutter
  • Perforated baguette pan (optional; used for propping in Step 1f)
  • Aluminum foil or other ovenproof props (in lieu of baguette pan)
  • Ruler
  • Zester or Microplane tool
  • Royal icing:
    • Brown (or the same color as your dough) very thick-consistency (@Julia M Usher calls it “glue”; see her video for reference), in parchment paper pastry cone
    • White piping-consistency, in pastry bag with PME #1 tip (or equivalent)
    • Light grey flood-consistency, in tipless pastry bag with opening equivalent to PME #3 tip
  • Plate or tray large enough to fit 7 1/8 x 7 1/2-in/18.0 x 19.0-cm (W x H) assembled tree

* Note: To ensure proper fit of all pieces and that the contoured cookies do not spread and crack during baking - which is more likely when dough is rolled thick - I suggest using a recipe with no leavening and a dry ingredient-to-fat ratio of at least 2.1 (my recipe ratio, by weight). "Dry ingredient" includes flour and any cocoa powder, but not sugar. However, it's important to note that every recipe is different (i.e., may have more or less of other ingredients) so my ratio is just a starting guide. You may need to adapt yours, particularly for the contoured pieces.

Step1: Cut and bake cookies

For this project, you will need to hand-cut a total of eight cookies in the following shapes and quantities (see more details in Steps 1a to 1i):

  • 6 (3 1/4 x 7 1/2-in/8.2 x 19.0-cm, W x H) half-tree cookies with notches in their bases
  • 2 (1 x 4-in/2.5 x 10.0-cm, W x L) rectangular cookies (to be contoured and formed into the cylindrical tree trunk)

Once again, allow me to give a huge shout-out to @Julia M. Usher for being a constant inspiration. I learned to contour cookies a few years back by watching her YouTube videos. Her recent feature in our first Watch-Learn-Create challenge, where she shared everything about contoured cookies in a two-hour video demo, inspired me to use my perforated mat and two tall cake rings in a useful and creative way in my November 2022 tutorial. In this month's tutorial, I take a similar approach with the rectangular cookies, but add another tool, a baguette pan, as a prop to keep the rolled perforated mat from moving. (You can also bake contoured cookies directly on baguette or other pans, though I don't do that here.)

In Steps 1e through 1i, I share photos and briefly explain how I contoured and assembled the two rectangular cookies into a cylinder using the tools just described, but please refer to Julia’s videos to learn the fundamentals of this shaping technique. Her most important tip is to use a non-spreading dough (as I described in the note above) so the half-cylinders don't spread and crack, especially when rolled to the 1/4-inch (0.6-centimeter) thickness called for in this tutorial. A non-spreading dough also increases the odds that the cylinder will fit snugly inside the notches in the half-trees. With any amount of spreading, it may not, and the notches may need to be pared back before decorating the half-trees. (See the end of Step 1 for more details.)

Here’s a photo recap of the baked cookies. In the picture, the two rectangular cookies have been contoured and attached together to form the cylindrical tree trunk.

7D0678B3-4C61-42EB-A6BB-F66E91ECEFFD

Let’s start with my design process:

a. In the picture below (left), my initial half-tree prototype is shown in yellow cardboard. I first drew a tree, and then cut it in half to get the template of each "mug-hugger" cookie. But as you can see, the flat sides of the tree halves didn’t touch each other in the center, and, as a result, the overall look was more like a bonfire rather than a tree.

b. So I went back to the drawing board and sketched a half-tree that was angled inward at the top. This way, when all of the halves hugged the rim of the cylinder, the top inner edges came closer to one another, and the construction looked like a tree! Again, you'll find my final angled template in "Attachments" at the end of this post.

ECB43DC7-E0C8-4729-B7A2-B7EE1CB00F79

Now, on to baking!

c. Roll your cookie dough to a thickness of 1/4 inch (0.6 centimeter), place my half-tree template on the dough, and use a paring knife to cut out six tree halves.

d. Use the mug-hugger cutter to cut a small (1/4 x 1-in/0.6 x 2.5-cm, W x H) notch at the base of each half-tree at a distance of about 3/8 inch (1 centimeter) from its curved side.

2FDCFF44-6184-404C-846A-7FA67F4CC5BA

e. Roll up a perforated baking mat, and insert it into the opening of a (2 1/2-in/6.5-cm) cake ring or round cookie cutter.

f. Place the rolled baking mat on top of the opening of the baguette pan so that the mat won’t roll over. (Alternatively, place the mat on a baking sheet, and prop it with crumpled aluminum foil or other ovenproof objects.)

3D1800CD-5E8D-4A06-A992-74F899B58B11

g. Again, roll your cookie dough to a thickness of 1/4 inch (0.6 centimeter), or slightly less. (The dough needs to be thin enough to fit inside the notches cut in the half-trees, but not so thin that the half-trees won't fit snugly on top of the cylinder. Again, using a non-spreading dough is the best way to ensure proper fit.) Use a ruler and a paring knife to hand-cut two (1 x 4-in/2.5 x 10-cm, W/H x L) rectangles.

h. Place the two rectangles crosswise on top of the rolled mat, as shown below (right). The cookies will bake very evenly, as hot air goes through the perforated mat. They also won’t slide if the dough is non-spreading, as the perforated mat provides some grip.

6A267825-1D42-4755-AA12-1A5F3EB0D29F

i. Bake according to your recipe, and once the cookies are out of the oven and cooled down, squeeze the mat between your fingers, and the cookies will easily pop off.

j. As necessary, use a zester or Microplane tool to file the edges of each half-cylinder to get two halves of the same size that fit tightly together along their short edges.

0C5DD2A5-F3D8-42DC-A3DD-A9CDFB4B043D

k. Pipe some brown royal icing “glue” along the short edges of one of the two cookies. (If your dough is not brown, use a "glue" color that matches it.)

l. Gently press the half-cylinders together to get a cylinder. Let the icing dry completely.

5B1FFE1B-9AD9-456D-B284-7226A1713CB6

Note: Before proceeding to Step 2, it's wise to test the fit of your half-trees on a half-cylinder. If the notches have closed too much during baking to fit snugly over the half-cylinder, then use a sharp paring knife to very gradually shave off dough in the notch interiors. Be careful of taking off too much dough, or the half-trees may lean in the final assembly.

Step 2: Decorate cookies

Only the six half-trees will be decorated; the cylinder cookie will remain bare. Please note that you need to decorate the cookies in three pairs, as shown in the next several steps. Heads-up: The decoration is time-consuming, but a good way to practice pressure piping!

a. Place two half-tree cookies on your table (positioned as mirror images of one another), and outline them using white piping-consistency royal icing and a PME #1 tip (or equivalent). Make sure you leave 2 millimeters (between 1/16 and 1/8 inch) bare along the jagged side of each cookie, as that space will be filled with piped dots in a later step.

b. Now, using a PME #3 tip (or equivalent), flood the cookies with grey flood-consistency royal icing. Let the icing dry completely.

6F9C0492-32AD-46DE-9437-A7FDF540C8B4

For Steps 2c through 2g, again use the white piping-consistency royal icing and a PME #1 tip (or equivalent).

c. Starting at each point on the jagged side of each cookie, pipe a sort of slanted/curved line that stops about 3/8 inch (1 centimeter) away from the opposite side.

d. At both ends of each line, pipe three large dots less than 1/16 inch (1 millimeter) apart from one other. Pipe larger (and larger) dots as you move away from the end of each line.

4D6A2A11-5C40-4003-A900-34F53090632C

e. Pipe a tiny snowflake right in the middle of each line by piping six "tailed" beads whose tails intersect at the snowflake center.

f. At the top point of each half-tree cookie, pipe three large dots less than 1/16 inch (1 millimeter) apart from one other. Pipe larger (and larger) dots as you move away from the point.

g. And last, pipe little dots along the jagged edge of each cookie.

4F0DB0BE-326D-4CA2-A136-81CD504E8ACF

Repeat Steps 2a to 2g for the remaining two cookie pairs. Let the icing dry completely.

E2161BB1-3CE9-4DF4-9A46-C41F37313875

Step 3: Assemble cookies

a. If you properly test-fit your cookies at the end of Step 1, assembling the cookies is very easy, as they just need to be hung and spaced evenly on the rim of the cylinder cookie.

b. Place the cylinder cookie in the center of a plate/tray that will be big enough to accommodate the assembled (7 1/8 x 7 1/2-in/18.0 x 19.0-cm, W x H) tree.

c. Place the first pair of half-tree cookies on the cylinder so that their iced surfaces face you.

d. Place the second pair of half-tree cookies on the cylinder, again so that their iced surfaces face you.

0C66241A-22F2-4E2A-B8EF-FADCF224AEEA

And, once again, hang the last two half-trees on the cylinder so that their iced sides face you. (Note: With all of the iced sides facing forward, the tree will have a small area in the back without icing. Of course, you could ice both sides of the half-tree cookies so the tree shows an iced surface from every angle. However, I opted not to, as I felt the icing-to-cookie ratio was better for eating this way.)

At last, this 3-D winter wonderland tree is ready to be served and enjoyed over a cup of tea or coffee with friends! I added a couple of pink fawns for a Valentine's Day twist!

50162C1D-8DF1-4A33-B0A5-DC081A9AC594

And if you add an LED tealight in the center, you have a cute lantern.

70EA05C3-ED1F-42E1-972C-DF7508B35152

Here’s a video recap with a better view of the finished project from all angles.

Happy winter! Manu

Manuela Pezzopane, affectionately called Manu by her friends and family, is the author of the blog feature Made by Manu, where each month she shares the method behind a magical cookie of her own making. In March 2022, Manu also assumed the role of host of our rebranded and reformatted Cookie Connection Challenges: Watch-Learn-Create Series, which debuted in a virtual video format in July 2022. A fan of everything handmade, Manu professes to have tried every possible hobby. However, it wasn’t until the end of 2014, when an American friend invited her to a Christmas cookie exchange, that she first discovered decorated cookies. In 2015, after watching Julia M. Usher's videos and signing up on Cookie Connection, Manu finally attempted her own designs. Since then, cookie decorating has become Manu’s passion, and her mesmerizing video shorts have earned her a large and loyal following throughout the global cookie community. Manu harks from Rome, Italy, where she currently resides. You can email Manu at manubiscottidecorati@gmail.com, follow her on Facebook and Instagram, or explore her past challenges and large library of Made by Manu tutorials here on Cookie Connection.

Photo credit: Manuela Pezzopane

Note: Made by Manu is a Cookie Connection blog feature written by Manuela Pezzopane, where each month she shares the method behind a magical cookie of her own making. This article expresses the views of the author, and not necessarily those of this site, its owners, its administrators, or its employees. To read all of Manuela's past Made by Manu tutorials, click here. And to see all of Cookie Connection's tutorials, click here.

Attachments

Images (15)
  • 3-D Winter Wonderland Tree Cookie - Where We're Headed!: Design, 3-D Cookie, and Photos by Manu
  • Visual Recap of Shapes Needed: Design, Cookies, and Photo by Manu
  • Steps 1a and 1b - Design Process: Design, 3-D Cookie, and Photos by Manu
  • Steps 1c and 1d - Cut Half-Tree Cookies and Notches: Design, Cookies, and Photos by Manu
  • Steps 1e and 1f - Roll Perforated Mat, and Prop in Baguette Pan: Photos by Manu
  • Steps 1g and 1h - Cut Rectangular Cookies, and Place on Rolled Mat: Cookies and Photos by Manu
  • Steps 1i and 1j - Let Contoured Cookies Cool, and File Short Edges: Cookies and Photos by Manu
  • Steps 1k and 1l - Pipe "Glue" on Half-Cylinder Edges, and Press Together: Cookies and Photos by Manu
  • Steps 2a and 2b - Outline and Flood Half-Tree Cookies: Design, Cookies, and Photos by Manu
  • Steps 2c and 2d - Pipe Lines and Dots on Half-Trees: Design, Cookies, and Photos by Manu
  • Steps 2e to 2g - Pipe Snowflakes and More Dots: Design, Cookies, and Photos by Manu
  • Summary of Decorated Cookies: Design, Cookies. and Photo by Manu
  • Steps 3a to 3d - Assemble Cookies: Design, Cookies, and Photos by Manu
  • 3-D Winter Wonderland Tree Cookie - All Done!: Design, 3-D Cookie, and Photo by Manu
  • 3-D Winter Wonderland Tree Cookie Lantern: Design, 3-D Cookie, and Photo by Manu
Videos (1)
A Quick Video Recap
Files (1)

Add Comment

Comments (23)

Newest · Oldest · Popular
@Kim Nichols posted:

Your intricate details always amaze me! Beautiful 🥰

Thank you, Kim 💙 Did you notice that I forgot to add the little dots in the of the half tree (the one in the front) in the main picture? 😊😊😊

Attachments

Images (1)
  • mceclip0

This is beautiful. I love the color too which is great for the whole winter, not just Christmas. It’s a stunning project.

Thank you, Tina. I like that grey although is very difficult to capture.

Thank you, Kim 💙 Did you notice that I forgot to add the little dots in the of the half tree (the one in the front) in the main picture? 😊😊😊

No and I still don’t see the missing dots 😂 no we always know what is missing with our own work lol 😍

Oh Manu, I love this!! Absolutelly great idea! I like the "arch" in the tree parts so the tree tops come back together at the top. So cool idea dear Manu!  @Manu biscotti decorati  The tutorial is great as always. Thank you for sharing!! ❤️

I wish you pros would show a 76 year young woman like me how you do what you do. I will never own a business but just for fun and exercise.

Thank you, Charlie, I share my ideas and the tutorials with the exact purpose to practice with a project while having fun. I tried to explain as much as I could here. This cookie project is quite easy, but the most difficult part could be contouring a cookie, if you are a newbie to this technique. For the contoured cookie part, Julia has many many videos on her YouTube channel where you can watch the step by step and learn. This is how I learned to contour cookies, and that’s why I suggested to refer to those videos. Moreover, I hosted a challenge here on Cookie Connection where Julia was the featured guest and she showcased everything you need to know about shaping and contouring cookies. You can find the two videos embedded in this blog post.
If you will still fid difficult to contour cookies and would like to create this 3-D cookie tree I got you covered: you can use a prism rather than a cylinder and get more or less the same result.

@Kim Nichols posted:

No and I still don’t see the missing dots 😂 no we always know what is missing with our own work lol 😍

I forgot to add dots to one of the half-tree cookies. I assembled the tree and since the lighting was good I decided to take pictures for the cover of this tutorial (grey cookies are really difficult to capture if the lighting is poor). I find extremely difficult taking pictures of 3-D cookie because of the perspective. So I was extremely focused on taking the picture from a right angle, center the tree in the photo and in a way that both fawn could be seen that apparently I didn’t notice the missing dots although they were missing on the cookie placed right in the front!!! 🤦‍♀️😄 Then I removed the two cookies in the front to insert the tea light and then hang them back on the rim of the cylinder cookie without noticing again the missing dots while taking more pictures!


1DCA0FA7-B36F-4763-8824-731FC273F67B

Attachments

Images (1)
  • 1DCA0FA7-B36F-4763-8824-731FC273F67B
Last edited by Manu biscotti decorati

Oh Manu, I love this!! Absolutelly great idea! I like the "arch" in the tree parts so the tree tops come back together at the top. So cool idea dear Manu!  @Manu biscotti decorati  The tutorial is great as always. Thank you for sharing!! ❤️

Thank you Gabi, I like that arch too! As I explained the new design of the trees leaning inwards came after I made the cardboard prototype. The edges of the cookies touch each other and some of their weight is released and the construction is more balanced.

@Sandy_S posted:

Thank you so much for this excellent tutorial, Manu.

@Zeena posted:

Yet another wonderful, simple yet elegant tutorial Manu @Manu biscotti decorati. Thank you.

Amazing, Manu👏👏👏

@LisaF posted:

Genius Manu. And so many possible variations! Thank you so much for sharing all of this with us ❤️

Thank you, everyone for your words and support!
Another design is already in the works, stay tuned🤗

@Camille P posted:

Manu, this is gorgeous! I have a question regarding your dry ingredient-to-fat ratio of  2:1. Does the fat also include eggs or is it only the butter?

Thank you Camille, it doesn’t include eggs. But as I said every recipe is different and you need to test and adapt yours. I didn’t mean to give a sort of exact ratio, that was just a starting guide. I learned to contour cookies from Julia and that’s why I suggested to refer to her videos to learn anything about contouring cookies. She has many videos on her YouTube channel about that. You may find very interesting this one where she explains how to adapt cookie dough for 3-D projects and where she talks about ratios (that’s why I shared mine).
I hosted a challenge here on Cookie Connection where Julia was the featured guest and she showcased everything you need to know about shaping and contouring cookies including adapting cookie dough. You can find the two videos embedded in this blog post.

Thank you, Charlie, I share my ideas and the tutorials with the exact purpose to practice with a project while having fun. I tried to explain as much as I could here. This cookie project is quite easy, but the most difficult part could be contouring a cookie, if you are a newbie to this technique. For the contoured cookie part, Julia has many many videos on her YouTube channel where you can watch the step by step and learn. This is how I learned to contour cookies, and that’s why I suggested to refer to those videos. Moreover, I hosted a challenge here on Cookie Connection where Julia was the featured guest and she showcased everything you need to know about shaping and contouring cookies. You can find the two videos embedded in this blog post.
If you will still fid difficult to contour cookies and would like to create this 3-D cookie tree I got you covered: you can use a prism rather than a cylinder and get more or less the same result.

A thousand thank you for that info. I will most assuredly go to the site.

Post
×
×
×
×
Link copied to your clipboard.
×