Skip to main content

Wedding with Textures
Practice Bakes Perfect Challenge #46 - Imprinted Icing

Add Comment

Comments (41)

Newest · Oldest · Popular

Here are the simple tools I used to create the textures I used in my flood consistency royal icing.
The  tip on greasing the molds helped - I used a spray and wiped the mold until a small amount remained. I also used the mold directly on the cookie surface with the bells , the dress and the gems of the ring.  However  with the cake and the inside of the ring I cut a circle out with parchment paper the size I needed and used that as my guide, filled the mold approximately the size of the circle , placed the parchment disc on it, tapped lightly, cleaned the sides and waited for it to dry. It easily peeled away from the mold.

Last edited by Tina at Sugar Wishes

What a wonderful and elegant application! Though I didn't grease my SugarVeil mats at all, and I found the icing came out easily as long as it was fully dry (overnight for me). I've never greased a silicone mold, I don't think, for any application.

What a wonderful and elegant application! Though I didn't grease my SugarVeil mats at all, and I found the icing came out easily as long as it was fully dry (overnight for me). I've never greased a silicone mold, I don't think, for any application.

But you suggested to lightly grease the mold but cautioned on fat breaking down RI so I very lightly greased the plastic and silicone and it peeled back effortlessly!   So thank you. The wax paper was easy in its own.

I’ve been MIA so it was nice participating in this!

They are all different patterns and yet you can see that it is a set that belongs together! Very festive Tina !! I like the beautiful bells the most !!!! Absolutely great!! ❤️😘  @Tina at Sugar Wishes

I wanted to try every possibility I could think of. It was a nice learning experience.
Thanks so much.

But you suggested to lightly grease the mold but cautioned on fat breaking down RI so I very lightly greased the plastic and silicone and it peeled back effortlessly!   So thank you. The wax paper was easy in its own.

I’ve been MIA so it was nice participating in this!

So great to see you here too! I think @Sweet Prodigy said that, especially the part about fat breaking down royal icing. I've never greased a silicone mold. I have lightly greased acetate sheets, and it helps a little, but I don't do it regularly either because it's an added step and I don't find it adds that much. (I also don't think greasing is going to break down very thick icing like what I used, perhaps only delay drying time - though I am not sure, and would want to test this before saying so definitively.) But I am glad greasing worked for you. I just wanted to make clear it's not a work habit of mine.

Last edited by Julia M. Usher

So great to see you here too! I think @Sweet Prodigy said that, especially the part about fat breaking down royal icing. I've never greased a silicone mold. I have lightly greased acetate sheets, and it helps a little, but I don't do it regularly either because it's an added step and I don't find it adds that much. (I also don't think greasing is going to break down very thick icing like what I used, perhaps only delay drying time - though I am not sure, and would want to test this before saying so definitively.) But I am glad greasing worked for you. I just wanted to make clear it's not a work habit of mine.



@Julia M. Usher posted:

So great to see you here too! I think @Sweet Prodigy said that, especially the part about fat breaking down royal icing. I've never greased a silicone mold. I have lightly greased acetate sheets, and it helps a little, but I don't do it regularly either because it's an added step and I don't find it adds that much. (I also don't think greasing is going to break down very thick icing like what I used, perhaps only delay drying time - though I am not sure, and would want to test this before saying so definitively.) But I am glad greasing worked for you. I just wanted to make clear it's not a work habit of mine.

My bad , I didn’t see the end of your quote and thought the suggestion came from you. I will correct that.

So great to see you here too! I think @Sweet Prodigy said that, especially the part about fat breaking down royal icing. I've never greased a silicone mold. I have lightly greased acetate sheets, and it helps a little, but I don't do it regularly either because it's an added step and I don't find it adds that much. (I also don't think greasing is going to break down very thick icing like what I used, perhaps only delay drying time - though I am not sure, and would want to test this before saying so definitively.) But I am glad greasing worked for you. I just wanted to make clear it's not a work habit of mine.

Yes, it was I who had mentioned this. I have lightly greased acetate sheets as well, and have found that it does help with more heavily flooded transfers. I have also accidentally applied a little too much grease to my acetate. It was a few years back, and I remember it ruined my transfer, which is why I cautioned that a small amount should be used and tested first.

Yes, it was I who had mentioned this. I have lightly greased acetate sheets as well, and have found that it does help with more heavily flooded transfers. I have also accidentally applied a little too much grease to my acetate. It was a few years back, and I remember it ruined my transfer, which is why I cautioned that a small amount should be used and tested first.

Thanks for the tip @Sweet Prodigy! And thank you for all you do keep us on our toes!

Last edited by Tina at Sugar Wishes

What a elegant textures and so romantic as you always do!!!Have to agree with Gabi I love those texture bells most,but whole wedding set is very beautiful ❤️

Thank you Petra!

What a beautiful and elegant set of cookies Tina @Tina at Sugar Wishes. I love the textures and colors. Thank you for the explanation on how you did it. Never knew I could place the mold directly on the cookies. Great job.

@Zeena posted:

What a beautiful and elegant set of cookies Tina @Tina at Sugar Wishes. I love the textures and colors. Thank you for the explanation on how you did it. Never knew I could place the mold directly on the cookies. Great job.

It was a bit clumsy but effective because they were large. Smaller ones would work easily.
I’m so happy you like them!

These wedding cookies look stunning. The combination of colors, textures, and design work so harmoniously together. At first glance, I couldn't figure out how you got such a fine texture on the bell cookie. Placing your textured material on top of the cookie was such a smart idea. What I also love is how your decorative accents compliment the textures so perfectly. Excellent work!

These wedding cookies look stunning. The combination of colors, textures, and design work so harmoniously together. At first glance, I couldn't figure out how you got such a fine texture on the bell cookie. Placing your textured material on top of the cookie was such a smart idea. What I also love is how your decorative accents compliment the textures so perfectly. Excellent work!

I’m so happy you like what I did. I enjoyed the process.  Thank you for the challenge!

Oh what beautiful art dear Tina @Tina at Sugar Wishes!!! As always, your work amazes me time and time again. The detail and texture in this set is perfection and I love the variety of techniques you've used. Simply incredible my friend. ❤️❤️❤️ Hugs...

Oh what beautiful art dear Tina @Tina at Sugar Wishes!!! As always, your work amazes me time and time again. The detail and texture in this set is perfection and I love the variety of techniques you've used. Simply incredible my friend. ❤️❤️❤️ Hugs...

As always you are kind and encouraging! I’m so happy you like them. Big hugs.

I thought for sure I had clicked the ❤️ reaction many days ago, but on second look I guess I missed it? So sorry for this late bump! Again, it's a beautiful set and so well done!!!

@Virago posted:

I thought for sure I had clicked the ❤️ reaction many days ago, but on second look I guess I missed it? So sorry for this late bump! Again, it's a beautiful set and so well done!!!

You’re so sweet. Thanks.

Hi Tina.  I had some difficulties to take out dried icing from my plastic mold sheet (for fondant, actually).  After I read what you wrote,  I put very thin oil on the mold.  It came out with ease.  Thank you.  

Post
×
×
×
×
Link copied to your clipboard.
×